Struct jet_margin::AdapterPositionFlags
source · [−]pub struct AdapterPositionFlags { /* private fields */ }
Implementations
sourceimpl AdapterPositionFlags
impl AdapterPositionFlags
sourcepub const REQUIRED: Self = _
pub const REQUIRED: Self = _
The position may never be removed by the user, even if the balance remains at zero, until the adapter explicitly unsets this flag.
sourcepub const PAST_DUE: Self = _
pub const PAST_DUE: Self = _
Only applies to claims. For any other position, this can be set, but it will be ignored. The claim must be repaid immediately. The account will be considered unhealty if there is any balance on this position.
sourcepub const fn from_bits(bits: u8) -> Option<Self>
pub const fn from_bits(bits: u8) -> Option<Self>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
sourcepub const fn from_bits_truncate(bits: u8) -> Self
pub const fn from_bits_truncate(bits: u8) -> Self
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
sourcepub const unsafe fn from_bits_unchecked(bits: u8) -> Self
pub const unsafe fn from_bits_unchecked(bits: u8) -> Self
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
Safety
The caller of the bitflags!
macro can chose to allow or
disallow extra bits for their bitflags type.
The caller of from_bits_unchecked()
has to ensure that
all bits correspond to a defined flag or that extra bits
are valid for this bitflags type.
sourcepub const fn intersects(&self, other: Self) -> bool
pub const fn intersects(&self, other: Self) -> bool
Returns true
if there are flags common to both self
and other
.
sourcepub const fn contains(&self, other: Self) -> bool
pub const fn contains(&self, other: Self) -> bool
Returns true
if all of the flags in other
are contained within self
.
sourcepub fn set(&mut self, other: Self, value: bool)
pub fn set(&mut self, other: Self, value: bool)
Inserts or removes the specified flags depending on the passed value.
sourcepub const fn intersection(self, other: Self) -> Self
pub const fn intersection(self, other: Self) -> Self
Returns the intersection between the flags in self
and
other
.
Specifically, the returned set contains only the flags which are
present in both self
and other
.
This is equivalent to using the &
operator (e.g.
ops::BitAnd
), as in flags & other
.
sourcepub const fn union(self, other: Self) -> Self
pub const fn union(self, other: Self) -> Self
Returns the union of between the flags in self
and other
.
Specifically, the returned set contains all flags which are
present in either self
or other
, including any which are
present in both (see Self::symmetric_difference
if that
is undesirable).
This is equivalent to using the |
operator (e.g.
ops::BitOr
), as in flags | other
.
sourcepub const fn difference(self, other: Self) -> Self
pub const fn difference(self, other: Self) -> Self
Returns the difference between the flags in self
and other
.
Specifically, the returned set contains all flags present in
self
, except for the ones present in other
.
It is also conceptually equivalent to the “bit-clear” operation:
flags & !other
(and this syntax is also supported).
This is equivalent to using the -
operator (e.g.
ops::Sub
), as in flags - other
.
sourcepub const fn symmetric_difference(self, other: Self) -> Self
pub const fn symmetric_difference(self, other: Self) -> Self
Returns the symmetric difference between the flags
in self
and other
.
Specifically, the returned set contains the flags present which
are present in self
or other
, but that are not present in
both. Equivalently, it contains the flags present in exactly
one of the sets self
and other
.
This is equivalent to using the ^
operator (e.g.
ops::BitXor
), as in flags ^ other
.
sourcepub const fn complement(self) -> Self
pub const fn complement(self) -> Self
Returns the complement of this set of flags.
Specifically, the returned set contains all the flags which are
not set in self
, but which are allowed for this type.
Alternatively, it can be thought of as the set difference
between Self::all()
and self
(e.g. Self::all() - self
)
This is equivalent to using the !
operator (e.g.
ops::Not
), as in !flags
.
Trait Implementations
sourceimpl Binary for AdapterPositionFlags
impl Binary for AdapterPositionFlags
sourceimpl BitAnd<AdapterPositionFlags> for AdapterPositionFlags
impl BitAnd<AdapterPositionFlags> for AdapterPositionFlags
type Output = AdapterPositionFlags
type Output = AdapterPositionFlags
&
operator.sourceimpl BitAndAssign<AdapterPositionFlags> for AdapterPositionFlags
impl BitAndAssign<AdapterPositionFlags> for AdapterPositionFlags
sourcefn bitand_assign(&mut self, other: Self)
fn bitand_assign(&mut self, other: Self)
Disables all flags disabled in the set.
sourceimpl BitOr<AdapterPositionFlags> for AdapterPositionFlags
impl BitOr<AdapterPositionFlags> for AdapterPositionFlags
sourcefn bitor(self, other: AdapterPositionFlags) -> Self
fn bitor(self, other: AdapterPositionFlags) -> Self
Returns the union of the two sets of flags.
type Output = AdapterPositionFlags
type Output = AdapterPositionFlags
|
operator.sourceimpl BitOrAssign<AdapterPositionFlags> for AdapterPositionFlags
impl BitOrAssign<AdapterPositionFlags> for AdapterPositionFlags
sourcefn bitor_assign(&mut self, other: Self)
fn bitor_assign(&mut self, other: Self)
Adds the set of flags.
sourceimpl BitXor<AdapterPositionFlags> for AdapterPositionFlags
impl BitXor<AdapterPositionFlags> for AdapterPositionFlags
sourcefn bitxor(self, other: Self) -> Self
fn bitxor(self, other: Self) -> Self
Returns the left flags, but with all the right flags toggled.
type Output = AdapterPositionFlags
type Output = AdapterPositionFlags
^
operator.sourceimpl BitXorAssign<AdapterPositionFlags> for AdapterPositionFlags
impl BitXorAssign<AdapterPositionFlags> for AdapterPositionFlags
sourcefn bitxor_assign(&mut self, other: Self)
fn bitxor_assign(&mut self, other: Self)
Toggles the set of flags.
sourceimpl BorshDeserialize for AdapterPositionFlagswhere
u8: BorshDeserialize,
impl BorshDeserialize for AdapterPositionFlagswhere
u8: BorshDeserialize,
sourcefn deserialize(buf: &mut &[u8]) -> Result<Self, Error>
fn deserialize(buf: &mut &[u8]) -> Result<Self, Error>
fn try_from_slice(v: &[u8]) -> Result<Self, Error>
fn try_from_slice(v: &[u8]) -> Result<Self, Error>
sourceimpl BorshSerialize for AdapterPositionFlagswhere
u8: BorshSerialize,
impl BorshSerialize for AdapterPositionFlagswhere
u8: BorshSerialize,
sourceimpl Clone for AdapterPositionFlags
impl Clone for AdapterPositionFlags
sourcefn clone(&self) -> AdapterPositionFlags
fn clone(&self) -> AdapterPositionFlags
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moresourceimpl Debug for AdapterPositionFlags
impl Debug for AdapterPositionFlags
sourceimpl Default for AdapterPositionFlags
impl Default for AdapterPositionFlags
sourcefn default() -> AdapterPositionFlags
fn default() -> AdapterPositionFlags
sourceimpl Extend<AdapterPositionFlags> for AdapterPositionFlags
impl Extend<AdapterPositionFlags> for AdapterPositionFlags
sourcefn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
sourcefn extend_one(&mut self, item: A)
fn extend_one(&mut self, item: A)
extend_one
)sourcefn extend_reserve(&mut self, additional: usize)
fn extend_reserve(&mut self, additional: usize)
extend_one
)sourceimpl FromIterator<AdapterPositionFlags> for AdapterPositionFlags
impl FromIterator<AdapterPositionFlags> for AdapterPositionFlags
sourcefn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
sourceimpl Hash for AdapterPositionFlags
impl Hash for AdapterPositionFlags
sourceimpl LowerHex for AdapterPositionFlags
impl LowerHex for AdapterPositionFlags
sourceimpl Not for AdapterPositionFlags
impl Not for AdapterPositionFlags
type Output = AdapterPositionFlags
type Output = AdapterPositionFlags
!
operator.sourceimpl Octal for AdapterPositionFlags
impl Octal for AdapterPositionFlags
sourceimpl Ord for AdapterPositionFlags
impl Ord for AdapterPositionFlags
sourcefn cmp(&self, other: &AdapterPositionFlags) -> Ordering
fn cmp(&self, other: &AdapterPositionFlags) -> Ordering
1.21.0 · sourcefn max(self, other: Self) -> Self
fn max(self, other: Self) -> Self
1.21.0 · sourcefn min(self, other: Self) -> Self
fn min(self, other: Self) -> Self
1.50.0 · sourcefn clamp(self, min: Self, max: Self) -> Selfwhere
Self: PartialOrd<Self>,
fn clamp(self, min: Self, max: Self) -> Selfwhere
Self: PartialOrd<Self>,
sourceimpl PartialEq<AdapterPositionFlags> for AdapterPositionFlags
impl PartialEq<AdapterPositionFlags> for AdapterPositionFlags
sourcefn eq(&self, other: &AdapterPositionFlags) -> bool
fn eq(&self, other: &AdapterPositionFlags) -> bool
sourceimpl PartialOrd<AdapterPositionFlags> for AdapterPositionFlags
impl PartialOrd<AdapterPositionFlags> for AdapterPositionFlags
sourcefn partial_cmp(&self, other: &AdapterPositionFlags) -> Option<Ordering>
fn partial_cmp(&self, other: &AdapterPositionFlags) -> Option<Ordering>
1.0.0 · sourcefn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
self
and other
) and is used by the <=
operator. Read moresourceimpl Sub<AdapterPositionFlags> for AdapterPositionFlags
impl Sub<AdapterPositionFlags> for AdapterPositionFlags
type Output = AdapterPositionFlags
type Output = AdapterPositionFlags
-
operator.sourceimpl SubAssign<AdapterPositionFlags> for AdapterPositionFlags
impl SubAssign<AdapterPositionFlags> for AdapterPositionFlags
sourcefn sub_assign(&mut self, other: Self)
fn sub_assign(&mut self, other: Self)
Disables all flags enabled in the set.
sourceimpl UpperHex for AdapterPositionFlags
impl UpperHex for AdapterPositionFlags
sourceimpl Zeroable for AdapterPositionFlags
impl Zeroable for AdapterPositionFlags
impl Copy for AdapterPositionFlags
impl Eq for AdapterPositionFlags
impl Pod for AdapterPositionFlags
impl StructuralEq for AdapterPositionFlags
impl StructuralPartialEq for AdapterPositionFlags
Auto Trait Implementations
impl RefUnwindSafe for AdapterPositionFlags
impl Send for AdapterPositionFlags
impl Sync for AdapterPositionFlags
impl Unpin for AdapterPositionFlags
impl UnwindSafe for AdapterPositionFlags
Blanket Implementations
sourceimpl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
impl<T> CheckedBitPattern for Twhere
T: AnyBitPattern,
impl<T> CheckedBitPattern for Twhere
T: AnyBitPattern,
type Bits = T
type Bits = T
Self
must have the same layout as the specified Bits
except for
the possible invalid bit patterns being checked during
is_valid_bit_pattern
. Read more